64-Bit / 33 MHz PCI Wide/Ultra2 SCSI RAID Controller
|
ICP
Order number |
ICP
Controller |
Number of
Ultra160 SCSI Channels |
max.
Data transfer rate per Ultra160 SCSI Channel |
additional Wide/Ultra SCSI Kanal |
RAID Levels |
Clustering Support |
Cache RAM - non-buffered PC100 DIMM (auch ECC) |
|
|
7808* |
|
1 |
80 MB/sec |
1 |
0, 1 |
upgradeable |
16 - 128 MB |
|
|
7818* |
|
1 |
80 MB/sec |
1 |
0, 1, 4, 5, 10 |
upgradable |
16 - 128 MB |
|
7809* |
|
2 |
80 MB/sec |
1 |
0, 1 |
upgradeable |
16 - 128 MB |
|
7828 |
|
2 |
80 MB/sec |
1 |
0, 1, 4, 5, 10 |
upgradeable |
16 - 128 MB |
|
7838* |
|
3 |
80 MB/sec |
1 |
0, 1, 4, 5, 10 |
upgradeable |
16 - 128 MB |
|
7868* |
|
1 |
80 MB/sec |
1 |
0, 1, 4, 5, 10 |
Yes |
16 - 128 MB |
|
7876* |
|
2 |
80 MB/sec |
1 |
0, 1, 4, 5, 10 |
Yes |
16 - 128 MB |
|
7888* |
|
3 |
80 MB/sec |
1 |
0, 1, 4, 5, 10 |
Yes |
16 - 128 MB |
| * no longer available |
Note:
The Controllers can either be operated in both, 32-Bit and 64-Bit PCI Bus Mastering Slots.
ICP Controllers cannot be operated without RAM (Non-Buffered PC100 DIMM). |
General Product Description
|
| Hardware RAID Controller |
- RAID 0 = Data Striping
- RAID 1 = Disk Mirroring/Disk Duplexing
- RAID 4 = Data Striping with Parity Drive
- RAID 5 = Data Striping with Striped Parity
- RAID 10 = Data Striping and Disk Mirroring
- or Cluster Support depending on controller model
- Hot Plug, Auto Hot Plug with SAF-TE/SES Support
- Private or Pool Hot Fix drives
|
| Versatile Connectivity and Networking Capabilities |
- 1, 2 or 3 Wide/Ultra2 SCSI channels with active, software-switchable mulit-mode termination
- either SE (Single Ended) or LVDS (Low Voltage Differential Signalling) operation
- maximum synchronous data transfer rates up to 80 MB/sec per channel (LVDS)
- up to 15 devices per channel
- cable length up to 12 meters (LVDS) per channel
- up to 3 external VHD connectors
- 1 additional Wide/Ultra SCSI channel for SCSI devices with a data transfer rate up to 40 MB/sec, dual connector system (50 pin and 68 pin)
|
| Driver Support |
- MS-DOS*, Windows* 9x/NT/2000, Novell* NetWare*, SCO* Unix*, UnixWare*, Linux* and Solaris*
- restricted Novell* Clustering Support
|
| 64-Bit Technology Throughout |
- 100MHz Intel i960® RN RISC processor
- 64-Bit Cache RAM, non-buffered PC100 DIMM, also with ESS, from minimum 16 MB up to 128 MB
- 64-Bit PCI bus interface with Bus Master transfer rates of 264 MB/sec, PCI 2.2 compatible
- hardware XOR engine for optimized RAId 4/5 operations
- backward compatible to 32-Bit slots
|
| Configuration Flexibility |
- simultaneous operation fo several disk arrays
- variable capacity configuration
- Online Capacity Expansion
- Online RAID Level Migration
- complete Disk Array Migration
|
| Delivery Contents |
- ICP Disk Array Controller (without RAM)
- User's Manual (Quick Installation Guide)
- ICP RAID Navigator and ICP RAID Console: installation and configuration programs as well as monitoring utilities
- CD-ROM with tools and drivers
- software updates with Flash RAM technology, easy download from this website
|
